giganto blanket progress

It’s been over 2 months since I’ve shared an update on my Aspen blanket that I have lovingly dubbed “the blanket everyone wants” (well, they seemed to be all the rage this winter).  You hold the yarn double so I don’t know why I got an odd number of balls, but I’ve finished 16 balls of Garnstudio DROPS Andes in 0100 Ecru and this is what I have:

Not Your Average Crochet's Aspen Blanket

Far from my estimated 60″ wide, it’s about 45.  Granted, I wasn’t stretching it at all and I think it will grow over time, but still, I was off on that guess.  Also, I thought 16 balls might be enough to finish the blanket.  It is not.  It’s only about 36″ tall (again unstretched).  I MIGHT be OK if this was 2/3 of a blanket, meaning I might be happy if I ordered 7 more balls to go with my extra 1.  At $7.15 a ball, though, that’s $50.05 not counting S&H, and I just can’t do that right now.  That’ll put this blanket at over $150 worth of yarn.  I hate putting that much into one project because I’ll be so worried about it getting messed up that I might not use and enjoy it, but this was one of the cheapest super bulky yarns in wool that I could find.  Maybe I should keep blankets acrylic, but wool blankets are so much warmer!  Guess there are pros and cons to both.

Not Your Average Crochet's Aspen Blanket

I’m really sad but I guess this will have to go into hibernation mode for a while until I can get the yarn.  The plus side is that I still haven’t broken my New Year’s Resolution to not buy yarn (although when I do buy the yarn to finish this I’m not sure it’ll count against me, since it’s to finish a WIP that I thought I had enough yarn for).  Also, Chris and I both needed a pair of new shoes this month so unfortunately that has to take precedence over yarn, hehe.  We got Chris some new kitchen Crocs because his current ones are old and literally falling apart (they’re heavy duty Crocs made specifically for working in kitchens, without holes in the top and with extra tread on the bottom and padding on the inside), and I finally had to replace my Rainbows sandals after about 9 years of constant wear.

My Wing Chun lessons are going great — we got to stay about 20 minutes extra last time and our teacher taught us the first 5 steps of the wooden dummy form, which was really cool.  I’ve been trying to practice at home on a wall but it has corners, which hurt my arms, and it doesn’t have arms for me to practice blocks.  I’ve looked at practice dummies but even the ones made with PVC are over $500.  Why does everything from yarn to shoes to practice equipment have to be so expensive?  Ugh.

Sorry, I’m a bit grumpy, so I’ll sign off for now, but I do appreciate you stopping by!  I have plenty of other WIPs going too so hopefully I’ll see you soon with updates on those, or maybe something even cooler!

KnitPro Zing needles have arrived – review & comparison

This is kind of my last big hurrah, since my new Wing Chun Kung Fu lessons are expensive (but I’m not complaining, it’s worth it)!  These KnitPro Zings were purchased from knitproneedles.co.uk — thank you guys for shipping to the US, or else it would have been really difficult and really expensive for me to get them!  KnitPro, Knitter’s Pride, and KnitPicks are all made by the same company, I believe, but for some reason have some differences in needle availability depending on where you are and what company officially ships to you.

KnitPro Zing

Zing is a new line, I believe.  I got all 13 sizes (US 0-10, or 2-6mm) in the 30cm (12″) length, although they have other lengths available as well as fixed circular needles and double points (I’d love them all)!  As you can see, they are aluminum needles that are color coded by size.  They are very sturdy, although of course as the gauge goes down the flexibility goes up a little.

I took my crappy bamboo needles that came with my Cath Kidston needle case out and am donating them (I’ve had them for years and never use them), and I’ve put the Zings in the case to give the needles at least a little protection since they didn’t come with a case, and the Cath Kidston needle roll will get some usefulness:

KnitPro Zing

I’ve taken some photos to compare the Zings with other popular brands, so you can see what they’re like and maybe decide if you want to get some yourself!

KnitPro Zing knitting needles

Zing vs. Boye

Boye needles are the most affordable and available aluminum metal option, at least in this area of the US, but let’s take a close look:

KnitPro Zing vs Boye

A US 10 Zing is on the left, a US 10 Boye is on the right.  The Zing is sharper, for sure.

KnitPro Zing vs Boye

You can sorta see that the Boye needle is a bit shinier than the Zing.  This is probably because the Zing needles have a bit more grip to them than Boye, which I like (although of course they’re still smoother than wood or bamboo or acrylic).  Boye needles have the size labeled on the end of the stopper, not on the shaft like the Zings (although it seems to be engraved on the Zings — I tried scratching it with my nail and it didn’t change a bit).  I think the quality difference is noticeable and that it’s worth the extra couple of bucks to get the Zings.

Zing vs. Karbonz

The Knitter’s Pride/KnitPro Karbonz have been so popular, so let’s compare those!

KnitPro Zing vs Karbonz

A US 5 Zing is on the left, a US 5 Karbonz is on the right.  The points seem similar, although it’s worth noting that the size label on the Karbonz DOES scratch off with my fingernail… Oops…  The Karbonz also has that join between the tip and the body, while the Zings don’t have a join at all, it’s just a texture/color change.  Many people say that the Karbonz joins are very smooth, but if you don’t like joins at all, there you go.  As far as the grip on these needles, they seem very, very similar.  In fact, when I closed my eyes and mixed these up I couldn’t tell which was which.  So in my opinion the Zings win, since they have no join, are color coded, and the size is engraved on the shaft, not stamped (also they’re cheaper than the Karbonz)!

Zing vs. KnitPicks Sunstruck

KnitPicks Sunstruck are made the same as their Rainbow and Caspian and Majestic needles, just minus the color, and I think the UK/EU equivalents are KnitPro Symfonie.

KnitPro Zing vs KnitPicks Sunstruck

As you can see, the Zing is sharper, but I do have to say that I’ve used the Sunstruck needles a few times so they may not be as sharp as they once were (although I don’t think the birch wood tips are supposed to get dull easily — they’re certainly a bazillion times better than my ChiaoGoo bamboo straights which I’m not even comparing in this post because mine have splintered at the tips a bit).  Obviously the Sunstruck needles have more grip, since they’re wood.

Unfortunately I don’t have any other brands to compare with — I’ve never owned any HiyaHiya needles or good ChiaoGoo needles or any fancy brands — but hopefully that gives you a bit of an idea as to what the Zing needles are like!

I’ll probably let you know more as I use them, but my first impression is great!

That’s all for today, thanks so much for stopping by!

PurlSoho hat: ta-da!

The pattern was the Classic Cuffed Hat but I didn’t do the cuff, so I can’t call it by it’s actual title, hehe.

Classic Hat | Not Your Average Crochet

The hat is made of 105 yds of PurlSoho’s Merino Script yarn (aran weight, 100% merino) in colorway 1530 Ice Blue.

Classic Hat | Not Your Average Crochet

I made some changes in the pattern, though; obviously I didn’t make the cuff, so the brim is 2″ instead of 4″, and I also worked the brim flat, joining in the round only when I started on the body of they hat.  This split brim goes at the back of the neck and makes it a lot easier to pull the hat low over the head and ears without bunching/pushing up at the back.  I also had to go up a needle size, using sizes US 6 & 8 instead of 5 & 7 (which I did try first but was too small — my last PurlSoho project had a tighter gauge as well, perhaps I should just start going up a needle size with all their patterns).

Classic Hat | Not Your Average Crochet

And finally, I made a couple of pom-poms to put on top, but I can’t decide which I like best.  Faux fur poms are all the rage right now, apparently, but I don’t have any and I think these are super cute:

Classic Hat | Not Your Average Crochet

The pink one was made of KnitPicks Comfy Worsted and the light blue was made of KnitPicks Stroll Glimmer.  Maybe I’ll leave the tails long and just tie them onto the top of the hat with the bow on the inside, then they can be interchangeable.  Or maybe I can put safety pins on them and change them out that way.  What would you suggest?

Well, that’s all for today, thanks for stopping by!

Classic Cowl: ta-da!

Purl Soho’s Classic Cowl is a fun pattern to make, and it both looks and feels really neat!

Classic Cowl on Not Your Average Crochet

That’s it folded in half.  It measures 52″ in circumference instead of the expected 60″ (I swear I cast on the right number of stitches — my gauge must have just been tight or something), and I saved enough yarn to make a hat by making it 8″ tall instead of 12″ tall.

Classic Cowl on Not Your Average Crochet

The “fluffy brioche stitch” is really cool and looks even more so in real life!  And the Purl Soho Worsted Twist yarn (100% merino) in Otter Brown is really pretty, although it was hard to get the brown to look accurate without making the backgrounds yellow, so yellow backgrounds it is.

Classic Cowl on Not Your Average Crochet

This is #9 of my 25 projects goal for 2016, so I’d say I’m moving right along!

I’m planning some crochet soon, so check back for that, and thanks for stopping by today!

Classic Cowl: begin!

Couldn’t resist the urge to start something new, and I’ve been eyeing Purl Soho’s Classic Cowl pattern for some time now.  There were already 4 skeins of the required yarn in my stash (Purl Soho Worsted Twist in Otter Brown), so I got started on Monday.

IMG_5292

I don’t know much about brioche knitting but the texture of this “fluffy brioche stitch” is awesome; I think it will be super warm and cushy!  The yarn is really soft, too, and enjoyable to use.  Here’s a closeup of the stitches (although it’s still hard to really see the texture as clearly as you can in real life):

IMG_5293

For some reason my ribbing is slightly slanted, but that should be fixed with a light blocking.  I might not use all 4 balls of yarn, though — it would be cool to save some for another project and I think even just 2 balls would make a very adequate cowl.

Well, that’s all for today, thanks for stopping by!

***Edit: and somebody asked to see the whole mandala ottoman cover from my last post, so here it is:

IMG_5267