Victoria Shawl: begin!

Like I didn’t have enough WIPs already.  🙂  I couldn’t resist purchasing the new Victoria Shawl pattern.  The perfect yarn was already sitting in my stash: KnitPicks Stroll Tonal Sock Yarn in Seashell.

Victoria Shawl

The pattern is easy to memorize and not difficult to do; so far it’s just been chains, double crochet stitches, treble crochet stitches (at the top edge), and puff stitches.  It’s working up at a decent rate, too.

Victoria Shawl

The stitch pattern kind of looks like flowers to me, and the colors in the yarn remind me of Japanese cherry blossoms.  Maybe I’ll nickname mine the “sakura shawl.”  Really pretty for spring, if your spring isn’t already hitting the 85 degree mark.  It’s been a little toasty this past week, and I’m envious of all the places that are still getting snow and wintry weather!  The only thing “snowing” here is the pollen — my red car looks brown from the the added layer of yellow-green.

Anyway, that’s all I’ve got for today.  See you soon, and thanks for stopping by!

giganto blanket progress

It’s been over 2 months since I’ve shared an update on my Aspen blanket that I have lovingly dubbed “the blanket everyone wants” (well, they seemed to be all the rage this winter).  You hold the yarn double so I don’t know why I got an odd number of balls, but I’ve finished 16 balls of Garnstudio DROPS Andes in 0100 Ecru and this is what I have:

Not Your Average Crochet's Aspen Blanket

Far from my estimated 60″ wide, it’s about 45.  Granted, I wasn’t stretching it at all and I think it will grow over time, but still, I was off on that guess.  Also, I thought 16 balls might be enough to finish the blanket.  It is not.  It’s only about 36″ tall (again unstretched).  I MIGHT be OK if this was 2/3 of a blanket, meaning I might be happy if I ordered 7 more balls to go with my extra 1.  At $7.15 a ball, though, that’s $50.05 not counting S&H, and I just can’t do that right now.  That’ll put this blanket at over $150 worth of yarn.  I hate putting that much into one project because I’ll be so worried about it getting messed up that I might not use and enjoy it, but this was one of the cheapest super bulky yarns in wool that I could find.  Maybe I should keep blankets acrylic, but wool blankets are so much warmer!  Guess there are pros and cons to both.

Not Your Average Crochet's Aspen Blanket

I’m really sad but I guess this will have to go into hibernation mode for a while until I can get the yarn.  The plus side is that I still haven’t broken my New Year’s Resolution to not buy yarn (although when I do buy the yarn to finish this I’m not sure it’ll count against me, since it’s to finish a WIP that I thought I had enough yarn for).  Also, Chris and I both needed a pair of new shoes this month so unfortunately that has to take precedence over yarn, hehe.  We got Chris some new kitchen Crocs because his current ones are old and literally falling apart (they’re heavy duty Crocs made specifically for working in kitchens, without holes in the top and with extra tread on the bottom and padding on the inside), and I finally had to replace my Rainbows sandals after about 9 years of constant wear.

My Wing Chun lessons are going great — we got to stay about 20 minutes extra last time and our teacher taught us the first 5 steps of the wooden dummy form, which was really cool.  I’ve been trying to practice at home on a wall but it has corners, which hurt my arms, and it doesn’t have arms for me to practice blocks.  I’ve looked at practice dummies but even the ones made with PVC are over $500.  Why does everything from yarn to shoes to practice equipment have to be so expensive?  Ugh.

Sorry, I’m a bit grumpy, so I’ll sign off for now, but I do appreciate you stopping by!  I have plenty of other WIPs going too so hopefully I’ll see you soon with updates on those, or maybe something even cooler!

free pattern release: the Snapdragon Stitch Cowl!

Hello everyone!  I know I’ve been quiet lately but I haven’t had much progress on my projects to share.  I finally finished writing this pattern up, though, and I hope you love it!
Snapdragon Stitch Cowl - Not Your Average Crochet

About

This pattern employs the snapdragon stitch as well as yarns the color of blooming snapdragons (although it would look great in any color)!  This cowl is worked in the round and is written in US terms.  There are two versions to choose from, a worsted weight version and a sock weight version.  Feel free to sell what you make with this pattern!  Also, you can find it on Ravelry here (I’d love to see your photos and progress)!

Specifics

Finished size: Worsted version: 55″ circumference, 9.5″ tall; Sock weight version: 59″ circumference, 7.5″ tall

Materials: Worsted version: US I/9 (5.5mm) hook, 2 skeins of KnitPicks Brava Worsted in Paprika (or 438 yds of any worsted yarn); Sock weight version: US 3/D (3.25mm) hook, 1 hank of Miss Babs Keira in Blooming Pansies (or 560 yds of any sock weight yarn)

Download free Snapdragon Stitch Cowl pattern (PDF)

Snapdragon Stitch Cowl - Not Your Average Crochet

Snapdragon Stitch Cowl - Not Your Average Crochet

Snapdragon Stitch Cowl - Not Your Average Crochet

Snapdragon Stitch Cowl - Not Your Average Crochet

I hope you enjoy the pattern!  If you have any questions, comments, or suggestions, feel free to contact me using the contact tab in the menu bar.

Thanks so much for stopping by, see you soon!

KnitPro Zing needles have arrived – review & comparison

This is kind of my last big hurrah, since my new Wing Chun Kung Fu lessons are expensive (but I’m not complaining, it’s worth it)!  These KnitPro Zings were purchased from knitproneedles.co.uk — thank you guys for shipping to the US, or else it would have been really difficult and really expensive for me to get them!  KnitPro, Knitter’s Pride, and KnitPicks are all made by the same company, I believe, but for some reason have some differences in needle availability depending on where you are and what company officially ships to you.

KnitPro Zing

Zing is a new line, I believe.  I got all 13 sizes (US 0-10, or 2-6mm) in the 30cm (12″) length, although they have other lengths available as well as fixed circular needles and double points (I’d love them all)!  As you can see, they are aluminum needles that are color coded by size.  They are very sturdy, although of course as the gauge goes down the flexibility goes up a little.

I took my crappy bamboo needles that came with my Cath Kidston needle case out and am donating them (I’ve had them for years and never use them), and I’ve put the Zings in the case to give the needles at least a little protection since they didn’t come with a case, and the Cath Kidston needle roll will get some usefulness:

KnitPro Zing

I’ve taken some photos to compare the Zings with other popular brands, so you can see what they’re like and maybe decide if you want to get some yourself!

KnitPro Zing knitting needles

Zing vs. Boye

Boye needles are the most affordable and available aluminum metal option, at least in this area of the US, but let’s take a close look:

KnitPro Zing vs Boye

A US 10 Zing is on the left, a US 10 Boye is on the right.  The Zing is sharper, for sure.

KnitPro Zing vs Boye

You can sorta see that the Boye needle is a bit shinier than the Zing.  This is probably because the Zing needles have a bit more grip to them than Boye, which I like (although of course they’re still smoother than wood or bamboo or acrylic).  Boye needles have the size labeled on the end of the stopper, not on the shaft like the Zings (although it seems to be engraved on the Zings — I tried scratching it with my nail and it didn’t change a bit).  I think the quality difference is noticeable and that it’s worth the extra couple of bucks to get the Zings.

Zing vs. Karbonz

The Knitter’s Pride/KnitPro Karbonz have been so popular, so let’s compare those!

KnitPro Zing vs Karbonz

A US 5 Zing is on the left, a US 5 Karbonz is on the right.  The points seem similar, although it’s worth noting that the size label on the Karbonz DOES scratch off with my fingernail… Oops…  The Karbonz also has that join between the tip and the body, while the Zings don’t have a join at all, it’s just a texture/color change.  Many people say that the Karbonz joins are very smooth, but if you don’t like joins at all, there you go.  As far as the grip on these needles, they seem very, very similar.  In fact, when I closed my eyes and mixed these up I couldn’t tell which was which.  So in my opinion the Zings win, since they have no join, are color coded, and the size is engraved on the shaft, not stamped (also they’re cheaper than the Karbonz)!

Zing vs. KnitPicks Sunstruck

KnitPicks Sunstruck are made the same as their Rainbow and Caspian and Majestic needles, just minus the color, and I think the UK/EU equivalents are KnitPro Symfonie.

KnitPro Zing vs KnitPicks Sunstruck

As you can see, the Zing is sharper, but I do have to say that I’ve used the Sunstruck needles a few times so they may not be as sharp as they once were (although I don’t think the birch wood tips are supposed to get dull easily — they’re certainly a bazillion times better than my ChiaoGoo bamboo straights which I’m not even comparing in this post because mine have splintered at the tips a bit).  Obviously the Sunstruck needles have more grip, since they’re wood.

Unfortunately I don’t have any other brands to compare with — I’ve never owned any HiyaHiya needles or good ChiaoGoo needles or any fancy brands — but hopefully that gives you a bit of an idea as to what the Zing needles are like!

I’ll probably let you know more as I use them, but my first impression is great!

That’s all for today, thanks so much for stopping by!

Double Wrap Infinity Scarf: ta-da!

First, thanks for your kind comments after my last post.  I appreciate your encouraging and kind words!  I feel a bit better, although things are still somewhat up and down, but it’s good that things are evening out a bit (I think).

This cowl took just a few hours, and although I didn’t have quite the required amount of yarn I still got 6″ of height.  This cowl (free pattern here) would make a good gift because it’s pretty, plush, and fast.  Note that the requirements on Ravelry are not the same as the pattern itself — it was updated to a larger hook size (I) and the foundation ch # changed, too.  Anyway, here’s mine folded in half (circumference is about 57-58″:

IMG_5499

I’d definitely make another one.  This one used the leftover yarn from my Classic Cowl, Purl Soho Worsted Twist in 3030 Otter Brown.  I really like this yarn, and wouldn’t mind getting it again when it’s on sale (that’s why I ventured to try this, it was discounted).  I’d love to get some other colors, too.

Here’s a closeup:

IMG_5501

The cowl is pretty simple, using rows of dc, hdc, & sc in a certain order, but it’s not boring to make since it’s so quick and the stitch does change every row.

Well, that’s all for today, thanks for stopping by, see you soon!